aluminum foil strip

Aluminum Disk

Home/Aluminum Disc/Aluminum Disk

Product Details ：

Payment & Shipping Terms ：

Place of Origin ： China

Payment Terms : T/T L/C

Certification ： ISO9001

Packaging Details : Depend on our customers.

Brand ： Signi Aluminium

Delivery Time : Depend on the order and destination

Aluminum disk Features:
 
1.Alloy A1050 A1060 A1100 A1200 A3003 A3004 Aluminum disk, deep drawing quality, good spinning quality,
   excellent forming and anodizing, no four ears. 
2.Excellent reflectivity, good for Polishing. 
3.Good anodized quality, suitable for hard anodizing and enameling 
4.Clean surface and smooth edge, hot rolled quality,  fine grains and after deep drawing no looper lines
5.Excellent pearl color anodizing 

    Aluminum disk, also called as Aluminum disk, or Aluminum disk sheet, Signi aluminium is professional Aluminum disks manufacturer in China, as for small Aluminum disk(diameter less than 700mm) normally they are punched from big mother coil, and big Aluminum disk(diameter bigger than 700mm) they are normally sheared from a big square sheet, then packed into standard wooden case. such A1050 A1060 A1070 A1100 A1200 A3003 A3004 Aluminum disk have good surface without scratch, good for spinning, deep drawing and hard anodizing, and fine grain, which is widely used for making cookware, cooking utensils, non-stick cookware fry pan etc. Our Aluminum disk have been exported to United states, Canada, Chile, Mexico etc many countries.

Alloy: 1050, 1060, 1070, 1100, 1200,3003,3004
Temper: O, H12, H14
Thickness: 0.4~5.0mm
Diameter: 80~1200mm

Chemical Properties
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ca V Ti Other Min.A1
1050 0.25 0.4 0.05 0.05 0.05 - - 0.05 - 0.05 0.03 0.03 99.5
1060 0.25 0.35 0.05 0.03 0.03 - - 0.05 - 0.05 0.03 0.03 99.6
1070 0.25 0.25 0.04 0.03 0.03 - - 0.04 - 0.05 0.03 0.03 99.7
1100 0.95 0.05-0.2 0.05 - - - 0.1 - - - 0.05 99
1200 1.00 0.05 0.05 - - - 0.1 - - 0.05 0.05 99
3003 0.6 0.7 0.05-0.2 1.0-1.5 - - - 0.1 - - - 0.15 Remainder
3004 0.3 0.7   0.25 1.0-1.5 0.8-1.3 - - 0.25 - - - 0.15 Remainder
 
Section Alloy Characteristics Application
1000 series AA1050 Excellent in forming, welding and corrosion
 resistance though lacking the strength		 Kitchen Appliances, Reflector Panel, Traffic Sing, 
Decorative Products, Conductive Material, 
Construction Material, Electrical Appliances, etc
AA1060
AA1070
AA1100
AA1200
3000 series AA3003
AA3004		 Have slightly higher strength than AA1100 
and excellent in forming, welding and 
corrosion resistance		 Kitchen Utensils, Interior & Exeterior Materials
 for Construuction, etc
 
Diameter List
≧20 ≧140 ≧170 ≧200 ≧250 ≧300 ≧400 ≧500 ≧600 ≧700 ≧800
20 140 170 200 250 300 400 500 600 700 800
25 141 172 203 252 305 405 505 610 705 810
93 142 173 205 254 310 410 510 615 710 838
100 143 175 210 255 312 420 515 619 720 890
105 144 176 211 258 315 425 520 630 730 902
109 145 177 212 260 320 430 525 635 740 945
110 147 178 215 267 325 435 530 645 760 960
112 149 180 216 268 330 440 540 650 770 1000
115 150 181 217 270 335 445 545 655 780 1150
118 153 182 218 272 340 450 550 665   1200
120 154 183 220 274 345 455 560 670    
121 155 184 221 275 350 460 565 680    
122 157 185 222 277 355 465 570 690    
123 158 188 225 278 360 470 575      
124 160 190 226 280 364 475 580      
127 161 192 230 282 368 480 585      
128 162 193 233 285 370 485        
129 163 195 235 290 375 490        
130 164 198 237 292 380 495        
132 165   238 293 385          
133 166   240 295 390          
134 167   242   395          
135 168   245              
136 169   249              
137                    
138                    
139                    
 

aluminum foil strip

Copyright：Copyright @; 2002-2019 Signi Aluminium. Power by DedeCms

Signi Aluminium